Low f-number microlenses for integration on optical microsystems

Abstract

This paper presents microlenses (MLs) with low f-number made of AZ4562 photoresist for integration on optical microsystems. The fabrication process was based on the thermal reflow and rehydration. Large series of MLs were fabricated with a width of 35 μm, a thickness of 5 μm, and spaced apart by 3 μm. The MLs were fabricated directly on the surface of a die with type n+/p-substrate junction photodiode fabricated in a standard CMOS process. The measured focal length was 49 μm with a tolerance of ±2 μm (maximum error of ±4%), resulting in a numerical aperture of 33.6 × 10-2 (±1.3 × 10-2). The measurements also revealed an f-number of 1.4.This work was sponsored by the Brazilian agency Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under the grant 400110/2014-8: Ciencia sem Fronteiras, Bolsa Pesquisador Visitante Especial (PVE) 2014. The associate editor coordinating the review of this paper and approving it for publication was Prof. M. Nurul Abedin