Design of High-Speed CMOS Interface Circuits for Optical Communications

Abstract

학위논문 (박사)-- 서울대학교 대학원 공과대학 전기·컴퓨터공학부, 2017. 8. 정덕균.The bandwidth requirement of wireline communications has increased ex-ponentially because of the ever-increasing demand for data centers and high-performance computing systems. However, it becomes difficult to satisfy the requirement with legacy electrical links which suffer from frequency-dependent losses due to skin effect, dielectric loss, channel reflections, and crosstalk, resulting in a severe bandwidth limitation. In order to overcome this challenge, it is necessary to introduce optical communication technology, which has been mainly used for long-reach communications, such as long-haul net-works and metropolitan area networks, to the medium- and short-reach com-munication systems. However, there still remain important issues to be resolved to facilitate the adoption of the optical technologies. The most critical challeng-es are the energy efficiency and the cost competitiveness as compared to the legacy copper-based electrical communications. One possible solution is silicon photonics that has long been investigated by a number of research groups. De-spite inherent incompatibility of silicon with the photonic world, silicon pho-tonics is promising and is the only solution that can leverage the mature CMOS technologies. In this thesis, we summarize the current status of silicon photonics and pro-vide the prospect of the optical interconnection. We also present key circuit techniques essential to the implementation of high-speed and low-power optical receivers. And then, we propose optical receiver architectures satisfying the aforementioned requirements with novel circuit techniques.CHAPTER 1 INTRODUCTION 1 1.1 MOTIVATION 1 1.2 THESIS ORGANIZATION 6 CHAPTER 2 BACKGROUND OF OPTICAL COMMUNICATION 7 2.1 OVERVIEW OF OPTICAL LINK 7 2.2 SILICON PHOTONICS 11 2.3 HYBRID INTEGRATION 22 2.4 SILICON-BASED PHOTODIODES 28 2.4.1 BASIC TERMINOLOGY 28 2.4.2 SILICON PD 29 2.4.3 GERMANIUM PD 32 2.4.4 INTEGRATION WITH WAVEGUIDE 33 CHAPTER 3 CIRCUIT TECHNIQUES FOR OPTICAL RECEIVER 35 3.1 BASIS OF TRANSIMPEDANCE AMPLIFIER 35 3.2 TOPOLOGY OF TIA 39 3.2.1 RESISTOR-BASED TIA 39 3.2.2 COMMON-GATE-BASED TIA 41 3.2.3 FEEDBACK-BASED TIA 44 3.2.4 INVERTER-BASED TIA 47 3.2.5 INTEGRATING RECEIVER 48 3.3 BANDWIDTH EXTENSION TECHNIQUES 49 3.3.1 INDUCTOR-BASED TECHNIQUE 49 3.3.2 EQUALIZATION 61 3.4 CLOCK AND DATA RECOVERY CIRCUITS 66 3.4.1 CDR BASIC 66 3.4.2 CDR EXAMPLES 68 CHAPTER 4 LOW-POWER OPTICAL RECEIVER FRONT-END 73 4.1 OVERVIEW 73 4.2 INVERTER-BASED TIA WITH RESISTIVE FEEDBACK 74 4.3 INVERTER-BASED TIA WITH RESISTIVE AND INDUCTIVE FEEDBACK 81 4.4 CIRCUIT IMPLEMENTATION 89 4.5 MEASUREMENT RESULTS 93 CHAPTER 5 BANDWIDTH- AND POWER-SCALABLE OPTICAL RECEIVER FRONT-END 96 5.1 OVERVIEW 96 5.2 BANDWIDTH AND POWER SCALABILITY 97 5.3 GM STABILIZATION 98 5.4 OVERALL BLOCK DIAGRAM OF RECEIVER 104 5.5 MEASUREMENT RESULTS 111 CHAPTER 6 CONCLUSION 118 BIBLIOGRAPHY 120 초 록 131Docto